



Toyota 2.8L 3L Diesel Engine
- Imported unit
- Inspected before listing
- 3-month warranty
- Nationwide delivery
Not sure if this fits your vehicle?
Send us your vehicle details and we'll help confirm the correct engine.
Beware of Scammers
Fake websites and invoices are using LDR’s name, product photos and business details to trick customers into paying. We will never ask you to pay into an unfamiliar bank account. Always confirm you are dealing with the real LDR Engines team before you transfer money.
Used imported Toyota 2.8L 3L engine. Intended as a replacement unit matched to the stated specification. Engine variant, mounting points, fuel system and electrical connections determine the required fitment.
Toyota 2.8L 3L Diesel Engine
When your trusted bakkie, van, or SUV begins losing compression, blowing excessive smoke, or facing severe internal wear after hundreds of thousands of hard working kilometres, sourcing a replacement engine is the most sensible route forward. Rather than incurring escalating downtime and unpredictable rebuild costs, swapping in a complete replacement motor gets your vehicle back into daily service. The Toyota 2.8L 3L diesel engine provides a dependable, direct-fit solution for drivers seeking to restore their vehicle's original pulling power and utility.
Overview
The Toyota 3L is a 2,779 cc naturally aspirated inline-four diesel motor belonging to Toyota's long-running L engine family. First introduced in 1988 and produced through 2015, the 3L evolved from the earlier 2.4-litre 2L and 2L-T engines, providing a displacement increase that later paved the way for the 3.0-litre 5L. The 3L features a longitudinal vertical installation layout. Both the cylinder block and the cylinder head are cast iron, delivering an assembly that weighs approximately 230 kg. The cylinder bore and piston stroke are evenly matched at 96.0 mm by 96.0 mm, working with a compression ratio of 22.2:1.
Valvetrain duties are handled by a single overhead camshaft (SOHC) configuration operating two valves per cylinder, or eight valves in total, driven by a timing belt. The fuel system uses mechanical prechamber indirect injection with a mechanical injection pump, bypassing sensitive electronic engine management. In standard tune, the naturally aspirated 3L delivers a factory output of 91 PS (67 kW or 90 hp) at 4,000 rpm paired with 188 N·m of torque at 2,400 rpm.
Key Features
- All-Cast-Iron Architecture – Constructed with both a cast iron engine block and a cast iron cylinder head, providing a rigid assembly with a total weight of roughly 230 kg.
- Mechanical Indirect Injection – Features a prechamber indirect fuel system and a mechanical injection pump that functions independently of complex sensors and electronics.
- Naturally Aspirated Simplicity – Dispenses with turbocharging components, keeping exhaust plumbing, intake routing, and thermal demands straightforward.
- Square Cylinder Geometry – Employs matching 96.0 mm bore and 96.0 mm stroke dimensions across four cylinders to produce steady low-end torque.
- SOHC 8-Valve Valvetrain – Incorporates a single overhead camshaft actuating two valves per cylinder via an external timing belt.
Technical Specifications
- Engine Code: 3L
- Displacement: 2,779 cc
- Configuration: Inline-4, longitudinal vertical
- Valvetrain: SOHC, 8 valves (2 valves per cylinder)
- Timing Drive: Timing belt
- Bore & Stroke: 96.0 mm × 96.0 mm
- Compression Ratio: 22.2:1
- Aspiration: Naturally aspirated
- Fuel Delivery: Indirect injection (prechamber) with mechanical injection pump
- Peak Power: 91 PS (67 kW / 90 hp) at 4,000 rpm
- Peak Torque: 188 N·m (19.2 kg·m) at 2,400 rpm
- Weight: 230 kg
- Block & Head Material: Cast iron block and cast iron cylinder head
- Production Era: 1988–2015
Performance & Applications
The naturally aspirated Toyota 3L diesel motor was fitted across a wide selection of light commercial vehicles, passenger vans, and SUVs.
- Toyota Hilux (5th generation / N80, 1988–1997) – Factory fitted in fifth-generation utility bakkies.
- Toyota Hilux (6th generation / N140, 1997–2005) – Powered sixth-generation utility bakkies.
- Toyota HiAce (H100, 1989–2004) – Fitted in fourth-generation commuter and cargo transport vans.
- Toyota 4Runner (2nd generation / N120, 1989–1995) – Fitted in second-generation sport utility vehicles.
- Toyota Land Cruiser Prado (J70, 1990–1996 & J90, 1996–2002) – Fitted in 70-series and 90-series Prado utility models.
- Toyota Dyna 150 (LY61 / LY211, 1988–2001) – Fitted in forward-control light commercial chassis cabs.
- Toyota Toyoace (LY series, 1988–1999) – Equipped light commercial Toyoace variants.
Service and Ownership Notes
- Manual Valve Clearances – The 3L valvetrain does not use hydraulic lifters; valve clearances must be checked and adjusted manually, with service recommended at least once every 30,000 km.
- Interference Valvetrain Risk – Because the engine uses an interference design, a broken or slipped timing belt will cause the pistons to contact the valves, potentially bending valves and damaging the camshaft.
- Injector Service Life – The mechanical fuel injectors generally require overhaul or replacement between 200,000 and 300,000 km to preserve clean combustion and atomisation.
- Oil Capacity & Grade – The system holds approximately 6.1 litres of engine oil, with a 5W-40 grade recommended for servicing.
- Design Durability – Built with an expected service lifespan of around 400,000 km when routine oil, filter, and cooling maintenance schedules are observed.
Why Choose the Toyota 3L Engine
- Minimal Electronic Dependability – Operating entirely on a mechanical fuel injection pump, the 3L avoids modern wiring harness faults and ECU failures.
- Toyota L-Series Compatibility – Shares structural heritage with the earlier 2L and later 5L motors within the Toyota L engine family.
- Tested Quality Imports – We import quality engines and gearboxes for most major brands, ensuring units are tested before sale.
- Three-Month Guarantee – Serviced replacement engines carry a 3-month guarantee.
- Professional In-House Fitment – Take advantage of specialised engine fitment at the Pretoria (Rosslyn) branch (passenger cars R10,000, bakkies R15,000, VAT inclusive).
Before You Order
- Inspect the engine block stamping on your current motor to verify the "3L" code matches your vehicle papers.
- Provide your vehicle identification number (VIN) and stamped engine code to confirm fitment before purchasing.
Conclusion
Replacing your tired motor with a quality tested Toyota 3L diesel engine restores the genuine reliability and working performance your vehicle was engineered to deliver. With nationwide delivery across South Africa and branches in Pretoria (Rosslyn), Kempton Park, and Ballito, sourcing your replacement unit is straightforward. Explore our broader range of Toyota engines or view our full inventory of replacement engines to find the right powertrain for your vehicle today.
Toyota 2.8L 3L Diesel Engine specifications
- Brand
- Toyota
- Category
- Engines
- Price
- R58 000
- Availability
- In stock
- Location
- Pretoria, South Africa
- Delivery
- Nationwide courier or collection
Not sure this engine matches your vehicle? Send us your VIN or registration number on WhatsApp and we will confirm fitment before you order.







